ACCELERATOR
|
|
SPECIFICATION:
1. | Appearance | : | White Powder |
2. | Melting Point | : | 177 to 179 |
3. | Specific gravity | : | 1.49 |
4. | Seive residue on 150 micron IS seive | : | 0.08 |
5. | Moisture | : | 0.2 |
6. | Copper PPM. Max. | : | 18 PPM |
7. | Mangnese PPM. Max. | : | 80 PPM |
8. | Assay | : | 98.2 |
9. | Solubility | : | Soluble in Benezene Methylchloride.
Insoluble in ethenol and water. |
SPECIFICATION:
CHEMICAL NAME | : | RUBOCURE TMTD |
SYNONYMS | : | THIRUM, TMT etc. |
BACK GROUND | : | ACCELERATOR RUBOCURE TMTD is a non discolouring ultra accelerator for pale or bright coloured rubber goods. It can be used alone or in combination with other accelerators for light or coloured rubber articles. |
PROPERTIES: | ||
APPEARANCE | : | WHITE POWDER |
SPECIFIC GRAVITY | : | 1.4 |
MELTING POINT | : | MINIMUM 147 oC |
MOISTURE | : | < 0.3% |
ASSEY | : | 98% MIN. |
SOLUBILITY | : | FREELY SOLUBLE IN METHYL CHLORIDE IN BENZENE & ACETONE. INSOLUBLE IN ETANOL AND WATER. |
USES | : | BRIGHT COLOURED ARTICLES, SUCH AS BATHING ARTICLES, FABRIC PROFING. IT IS USED IN RUBBER FOOTWEAR, FABRIC PROOFING, MECHANICAL GOODS AND FAST CURING EBONITE AND DIPPED GOODS. IT IS ALSO USED AS ACTIVATOR FOR MIXES CONTAINING MERCAPTO OR SULFANAMIDE TYPE OF ACCELERATORS. |
DOSAGE | : | INTRODUCED IN RUBBER IN THE AMOUNT OF 0.5-2.0 WT. PTS. TOGETHER WITH USUAL AMOUNT OF SULPHUR AND ZnO. |
PACKING | : | 20 KGS. NET HESSIEN PVC BAGS. |
Back |