Rubo-Synth Impex Pvt. Ltd.::.rubber chemicals, rubber, chemicals, accelerator zdc, rubocre zdc, precipitated calcium carbonate, accelerator rubocure-tmtd, reclaim rubber, activated calcium carbonate, synthetic red oxide, antioxidant, silicon emulsion, brown factice, stearic acid, blowing agent, stearic acid, lubstric grade, ebonite dust brown, suppliers, raw material, rubber industries, plastic, paint, ink, pesticide, mumbai, india, indian, rubo-synth impex pvt ltd

SULPHUR POWDER

SPECIFICATION

MF MICROFINE UF ULTRAFINE RGS REGULAR

1. PURITY (ELEMENTAL SULPHUR BY MASS) 99.5 99.5 99.5

2. ASH CONTENT (% MAX.) 0.12 0.15 0.25

3. ACIDITY (AS THE % MAX. OF H₂SO₄) 0.01 0.015 0.025

4. MOISTURE (% MAX.) 0.1 0.15 0.2

5. PARTICLE SIZE % MIN. THROUGH B.S.S.

100# 99.5 99.5 99.5

200# 95 - 99 92 - 94 90

6. SPECIFIC GRAVITY 2.05 2.05 2.05

7. MELTING POINT IN C⁰ 113⁰C 113⁰C 113⁰C

NOTE: ANY SPECIFICATION OF THE ABOVE GRADES CAN BE ALTERED TO SUIT THE NEEDS OF CLIENTS REQUIREMENTS.

ASH CONTENT : IS MINIMISED TO ENSURE NO INTERFERENCE IN AGING PROPERTIES AND FOR SOME CRITICAL FUNCTION AREAS.

ACIDITY : IS KEPT UNDER CONTROL TO ENSURE THAT CURE RATE IS NOT RETARDED.

MOISTURE : IS MINIMISED, SO AS NOT TO IMPAIR ADHESION IN CASE CONTENT OF TEXTILE RUBBER COMPOSITION AND ALSO BECAUSE MOISTURER IS A CARRIER FOR FREE ACIDITY.

PARTICULAR SIZE : IS CONTINUOUSLY MONITORED AND STRICTLY CONTROLLED. UNIFORM PARTICLE SIZE ENSURES UNIFORM DISPENSION IN THE RUBBER MASS WITHIN A SHORT PERIOD.

(SPEC-80)

Back

rubber chemicals, rubber, chemicals, accelerator zdc, rubocre zdc, precipitated calcium carbonate, accelerator rubocure-tmtd, reclaim rubber, activated calcium carbonate, synthetic red oxide, antioxidant, silicon emulsion, brown factice, stearic acid, blowing agent, stearic acid, lubstric grade, ebonite dust brown, suppliers, raw material, rubber industries, plastic, paint, ink, pesticide, mumbai, india, indian, rubo-synth impex pvt ltd

	MF MICROFINE	UF ULTRAFINE	RGS REGULAR
1. PURITY (ELEMENTAL SULPHUR BY MASS)	99.5	99.5	99.5
2. ASH CONTENT (% MAX.)	0.12	0.15	0.25
3. ACIDITY (AS THE % MAX. OF H₂SO₄)	0.01	0.015	0.025
4. MOISTURE (% MAX.)	0.1	0.15	0.2
5. PARTICLE SIZE % MIN. THROUGH B.S.S.
100#	99.5	99.5	99.5
200#	95 - 99	92 - 94	90
6. SPECIFIC GRAVITY	2.05	2.05	2.05
7. MELTING POINT IN C⁰	113⁰C	113⁰C	113⁰C

ASH CONTENT	:	IS MINIMISED TO ENSURE NO INTERFERENCE IN AGING PROPERTIES AND FOR SOME CRITICAL FUNCTION AREAS.
ACIDITY	:	IS KEPT UNDER CONTROL TO ENSURE THAT CURE RATE IS NOT RETARDED.
MOISTURE	:	IS MINIMISED, SO AS NOT TO IMPAIR ADHESION IN CASE CONTENT OF TEXTILE RUBBER COMPOSITION AND ALSO BECAUSE MOISTURER IS A CARRIER FOR FREE ACIDITY.
PARTICULAR SIZE	:	IS CONTINUOUSLY MONITORED AND STRICTLY CONTROLLED. UNIFORM PARTICLE SIZE ENSURES UNIFORM DISPENSION IN THE RUBBER MASS WITHIN A SHORT PERIOD.